Table 333: File and Flag Configuration Details
Option
System > Accounting > Traceoptions > File
Comment
Filename
Size
Files
None
world-readable
no-world-readable
System > Accounting > Traceoptions > Flag
Name
Comment
Related
Documentation
Configuring Archival (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Apply—Applies the traceoptions settings.
Function
Supplies a descriptive comment for the filename.
Specifies the filename to write the traceoptions.
Specifies the maximum size of the trace files.
Specifies the maximum number of trace files.
Specifies that neither the world-readable nor the
no-world-readable option is enabled.
Allows any user to read the log file.
Prevents any user from reading the log file.
Specifies the trace flag name.
Supplies a descriptive comment for the trace flag.
Configuring Archival (NSM Procedure) on page 535
Configuring ARP (NSM Procedure) on page 536
Configuring Auto Configuration (NSM Procedure) on page 537
To configure the archival feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the archival feature.
Click the Configuration tab. In the configuration tree, select System > Archival.
3.
Enter a comment in the Archival workspace that describes the archival feature.
4.
In the configuration tree, select System > Archival > Configuration.
5.
Enter a comment in the Configuration workspace that describes the configuration of
6.
the archival feature.
Chapter 25: Configuring System
Your Action
(Optional) Enter a comment.
Enter a filename.
Enter the maximum file size.
Set the maximum number of trace files.
Range: 2 - 1000.
Select the option.
(Optional) Select the option.
(Optional) Select the option.
Enter a trace flag name.
(Optional) Enter a comment.
535