Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 235

Copyright © 2010, Juniper Networks, Inc.
Table 100: BOOTP Configuration Details (continued)
Task
Configure DHCP option 82.
Chapter 16: Configuring Forwarding Options
Your Action
1. Click Dhcp Option82 next to Bootp.
2. In the Comment box, enter the comment.
3. Select the Disable check box to disable DHCP option 82
on this VLAN.
4. Click Circuit Id next to Dhcp Option82.
5. In the Comment box, enter the comment.
6. From the Prefix list, select the prefix
hostname—Set hostname as the prefix.
7. Select the Use Interface Description check box to use
interface description instead of name.
8. Select the Use Vlan Id check box to use vlan id.
9. Click Remote Id next to Dhcp Option82.
10. In the Comment box, enter the comment.
11. From the Prefix list, select the prefix
none—Set no prefix.
hostname—Set hostname as the prefix.
mac—Set chassis MAC as the prefix.
12. Select the Use Interface Description check box to use
interface description instead of name.
13. In the Use String check box, enter the raw string instead
of the default remote ID.
14. Click Vendor Id next to Dhcp Option82.
15. In the Comment box, enter the comment.
16. In the Use String check box, enter the raw string instead
of the default remote ID.
199