Configuring Traceoptions (Nsm Procedure); Table 247: Traceoptions Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 246: CA Profile Configuration Details (continued)
Option Function
ca-profile >
Revocation Check
Comment Supplies a descriptive comment for disabling the CRL.
On Download Failure Disables the revocation check for the CRL download
failure.
ca-profile >
Revocation Check
Name Specifies the URL or CRL distribution point for the CA.
Comment Supplies a descriptive comment for the URL or CRL
distribution point for CA.
Password Specifies the password for authentication with the
server.

Configuring Traceoptions (NSM Procedure)

Table 247: Traceoptions Configuration Details

Option
Comment
Copyright © 2010, Juniper Networks, Inc.
> Crl > Disable
> Crl > Url
The traceoptions feature allows you to configure the file and the flag options.
To configure traceoptions:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the traceoptions.
Click the Configuration tab. In the configuration tree, select Security > Pki >
3.
Traceoptions.
Configure the options as specified in Table 247 on page 417.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the traceoptions settings.
Function
Supplies a descriptive comment for the
traceoptions.
Chapter 22: Configuring Security
Your Action
(Optional) Enter a comment.
Select the On Download Failure check box
to enable this feature.
Enter the URL or CRL distribution point for
the CA.
Enter a comment. (Optional)
Enter the password.
Your Action
(Optional) Enter a comment.
417