Configuring User Accounts; Configuring Template Accounts (Nsm Procedure); Table 55: User Authentication Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Configuring User Accounts

Related
Documentation

Configuring Template Accounts (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
User accounts provide one way for users to access the device. (Users can access the
router without accounts if you configured RADIUS or TACACS+ servers.) For each account,
define the login name for the user and, optionally, information that identifies the user.
After you have created an account, a home directory is created for the user.
To configure user accounts:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab and then double-click the device for which you want to
2.
configure login class.
Click the Configuration tab. In the configuration tree, select System > Login > User.
3.
Add or modify login class settings as specified in Table 55 on page 119.
4.
Click one:
5.
New—Adds a new user account.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 55: User Authentication Configuration Details

Option Function
Name Identifies the user with a unique
name.
Class Specifies the user's login class.
Login > User > Authentication
Plain Text Password Specifies the user's password.
Value
Configuring RADIUS Authentication (NSM Procedure) on page 115
Configuring TACACS+ Authentication (NSM Procedure) on page 116
Configuring Authentication Order (NSM Procedure) on page 117
You can create template accounts that are shared by a set of users when you are using
RADIUS or TACACS+ authentication. When a user is authenticated by a template account,
Chapter 12: Configuring Authentication
Your Action
Enter a unique name for the user.
Select the class name.
Enter the plain text password for
the user.
119