CHAPTER 6
Configuring M-series and MX-series
Devices Overview
About Device Configuration
Copyright © 2010, Juniper Networks, Inc.
About Device Configuration on page 43
M-series and MX-series Device Configuration Settings Supported in NSM on page 44
Configuring Device Features on page 46
Example: Configuration of Interfaces for MPLS in the CLI and NSM on page 47
This topic does not provide extensive details for configuring features on M-series and
MX-series devices in Network and Security Manager (NSM). For detailed information
about configuring specific features for M-series and MX-series devices, see the following
JUNOS software configuration guide:
JUNOS System Basics Configuration Guide for system, chassis, security, and access
parameters.
JUNOS Network Interfaces Configuration Guide for interface parameters.
JUNOS Policy Framework Configuration Guide for forwarding options and firewall
parameters.
JUNOS Configuration and Diagnostic Automation Guide for event options parameters.
JUNOS Network Management Configuration Guide for SNMP and accounting options
parameters.
JUNOS Routing Protocols Configuration Guide for routing options and protocols
parameters.
JUNOS VPNs Configuration Guide for policy options parameters.
JUNOS Class of Service Configuration Guide for class of service parameters.
JUNOS Software with Enhanced Services Security Configuration Guide for security
parameters.
JUNOS Services Interface Configuration Guide for service parameters.
43