Table of Contents
Advertisement
M-series and MX-series Devices
Configuring DiffServ-Aware Traffic Engineering (NSM Procedure)
286
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 145: Automatic Policers Configuration Details
Task
Allocate bandwidth for the
reroute path.
Apply the same policer
action to all the class types.
Differentiated Services (DiffServ)-aware traffic engineering provides a way to guarantee
a specified level of service over an MPLS network. The routers providing DiffServ-aware
traffic engineering are part of a differentiated services network domain. All routers
participating in a differentiated services domain must have DiffServ-aware traffic
engineering enabled.
To configure DiffServ-aware traffic engineering in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols.
3.
Select Mpls.
4.
Add or modify settings as specified in Table 146 on page 287.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Click Bandwidth next to Mpls.
2. In the Comment box, enter the comment.
3. In the Per Traffic Class Bandwidth box, enter the bandwidth,
in bits per second.
4. In the Ct0 box, enter the bandwidth, for the specified class.
5. In the Ct1 box, enter the bandwidth, for the specified class.
6. In the Ct2 box, enter the bandwidth, for the specified class.
7. In the Ct3 box, enter the bandwidth, for the specified class.
1.
Click Class next to Automatic Policing.
2. Click Add new entry next to Class.
3. From the Name list, select the class type to which the policer
action is to be applied.
4. In the Comment box, enter the comment.
5. Select one of the policer actions.
drop—Drop all packets.
loss-priority-high—Set the packet loss priority (PLP) to high.
loss-priority-low—Set the PLP to low.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
