Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 187

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 72: Translation Table Configuration Details (continued)
Task
Translate incoming Inet precedence values to
new values.
Configuring CoS Rewrite Rules (NSM Procedure)
Configuring CoS Routing Instances (NSM Procedure) on page 140
Configuring Tracing Operations (NSM Procedure) on page 145
Configuring CoS Traffic Control Profiles (NSM Procedure) on page 146
Chapter 13: Configuring Class of Service Features
Your Action
1. Click To Inet Precedence From Inet
Precedence next to Translation Table.
2. Click Add new entry next to To Inet
Precedence From Inet Precedence.
3. In the Name box, enter the Inet precedence
values.
4. In the Comment box, enter the comment.
5. Click To Code Point next to
to-inet-precedence-from-inet-precedence.
6. Click Add new entry next to
to-inet-precedence-from-inet-precedence.
7. From the Name list, select the INET
precedence code point.
8. In the Comment box, enter the comment.
9. Click From Code Points next to
to-code-point and perform the following:
Add—Adds the selected code points from
the Non member list to the Members list.
Remove—Removes the selected code
points from the Members list.
Add All—Adds all the code points from
the Non-members list to the Members
list.
Remove All—Removes all the code points
from the Members list.
151