Table 257: Flag Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices

Table 257: Flag Configuration Details

Option Function
Name Specifies the trace flag name.
Comment Supplies a descriptive comment for the trace flag.
Syslog Specifies that the NAT flow trace files are recorded
to the system log.
Related
Documentation
430
Add or modify setting as specified in Table 257 on page 430.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the flag settings.
Configuring IKE (NSM Procedure) on page 401
Configuring an IPsec (NSM Procedure) on page 408
Configuring a PKI (NSM Procedure) on page 414
Your Action
Select a name from the list.
(Optional) Enter a comment.
Select the Syslog check box to enable this
feature.
Copyright © 2010, Juniper Networks, Inc.