Table of Contents
Advertisement
Table 332: Destination Configuration Details (continued)
Option
Function
Comment
Supplies a descriptive comment for the radius.
System > Accounting > Destination > Radius > Server
Name
Specifies the radius server address name.
Comment
Supplies a descriptive comment for the radius
server.
Port
Specifies the radius server authentication port
number.
Accounting Port
Specifies the radius server accounting port number.
Secret
Specifies the shared secret with the radius server.
Timeout
Specifies the request timeout period of the radius
server.
Retry
Specifies the number of retry attempts.
Source Address
Specifies the source address of the radius.
System > Accounting > Destination > Tacplus
Enable Feature
Enables to configure the tacplus feature of the
destination option.
Comment
Supplies a descriptive comment for the tacplus.
System > Accounting > Destination > Tacplus > Server
Name
Specifies the TACACS+ authentication server
address name.
Comment
Supplies a descriptive comment for the TACACS+
authentication server.
Port
Specifies the TACACS+ authentication server port
number.
Secret
Specifies the shared secret with the authentication
server.
Timeout
Specifies the request time period of the
authentication server.
Copyright © 2010, Juniper Networks, Inc.
Chapter 25: Configuring System
Your Action
(Optional) Enter a comment.
Enter the radius server address name.
(Optional) Enter a comment.
Set the radius server authentication port number.
Range: 1 - 65535.
Set the radius server accounting port number.
Range: 1 - 65535.
Enter the password for the secret with the radius
server.
Set the request timeout period of the radius
server. Range: 1 - 90.
Set the retry attempts. Range: 1 - 10.
Enter a source address for the radius.
Select the Enable Feature check box to enable
this feature.
(Optional) Enter a comment.
Enter the TACACS+ authentication server
address name.
(Optional) Enter a comment.
Set the TACACS+ authentication server port
number. Range: 1 - 65535.
Enter the password for the secret with the
authentication server.
Set the request timeout period of the
authentication server. Range: 1 - 90.
533
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1