Table of Contents
Advertisement
Configuring Service Interface Pools (NSM Procedure)
Table 302: Service Interface Pools Configuration Details
Option
Name
Copyright © 2010, Juniper Networks, Inc.
Table 301: Virtual Interface Configuration Details
Task
Configure a virtual interface
To configure service interface pool options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the service interface pool options.
Click the Configuration tab. In the configuration tree, expand Services > Service
3.
Interface Pools.
In the Service Interface Pools workspace, enter a comment for the service interface
4.
pool.
In the configuration tree, select Services > Service Interface Pools > Pool.
5.
Add or modify settings as specified in Table 302 on page 493.
6.
Click one:
7.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the service interface pool options.
Function
Specifies the service interface pool name.
Your Action
1.
Click Add new entry next to Virtual Interface.
2. In the Name box, enter the identifier number for the interface.
Range: 0 through 1023
3. In the Comment box, enter the comment.
4. From the Service State list, select the service state of the
virtual interface.
5. In the Interface box, enter the interface name.
6. Expand virtual-interface.
7. Click Media Service next to virtual-interface.
8. Click Add new entry next to Media Service.
9. In the dialog box, enter the identifier for the media service
name.
10. Click Routing Instance next to virtual-interface.
11. In the Comment box, enter the comment.
12. From the Routing Instance Name list, select the name of a
routing instance.
13. In the Service Interface box, enter the name and logical
interface number of the service Interface in
interface-name.unit-number form.
Your Action
Enter a name.
Chapter 23: Configuring Services
493
Advertisement
Table of Contents
