Table of Contents
Advertisement
M-series and MX-series Devices
Table 348: RADIUS Server Configuration Details
Option
Function
Name
Specifies the RADIUS server address name.
Comment
Supplies a descriptive comment of the RADIUS server.
Port
Specifies the RADIUS server authentication port number.
Accounting Port
Specifies the RADIUS server accounting port number.
Secret
Specifies the password to use with the RADIUS server. The
secret password used by the local router must match that
used by the server.
Timeout
Specifies the amount of time that the local router waits to
receive a response from a RADIUS server.
Retry
Specifies the number of times that the router is allowed
to attempt to contact a RADIUS authentication or
accounting server.
Source Address
Specifies the source address for each configured RADIUS
server.
Related
Documentation
Configuring Root Authentication (NSM Procedure)
558
Configuring Ports (NSM Procedure) on page 555
Configuring RADIUS Options (NSM Procedure) on page 556
Configuring a Name Server (NSM Procedure) on page 554
You can configure the authentication methods for the root-level user, whose username
is "root."
To configure root authentication:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab. Then double-click the device for which you want to configure
2.
root authentication.
Click the Configuration tab. In the configuration tree, select System > Root
3.
Authentication.
Enter a plaintext password in the Plain text Password Value.
4.
NOTE: You can specify only one plain text password.
Your Action
Enter the RADIUS server address name.
(Optional) Enter a comment.
Set the RADIUS server authentication port
number. Range: 1 - 65535.
Set the RADIUS server accounting port
number. Range: 1 - 65535.
Enter the shared secret password to use with
the RADIUS server.
Enter the request time out period. Range: 1 -
90.
Set the retry attempts. Range: 1 - 10.
Enter the source address.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
