Configuring A Log File (Nsm Procedure); Table 30: Class Usage Profile Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices

Configuring a Log File (NSM Procedure)

74

Table 30: Class Usage Profile Configuration Details

Task
Configure the class usage
profile.
An accounting profile specifies what statistics should be collected and written to a log
file. You can configure an accounting-data log file using this option.
To configure a log file in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Accounting Options.
3.
Select File.
4.
Add or modify the settings as specified in Table 31 on page 75.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1. Click Add new entry next to Class Usage Profile.
2. Expand class-usage-profile.
3. In the Name box, enter the name of the destination class
profile.
4. In the Comment box, enter the comment for the class usage
profile.
5. In the File box, enter the name of the log file.
6. From the Interval list, select the amount of time between each
collection of statistics.
Range: 1 through 1048576 minutes
Default: 30 minutes
7. Click Destination Classes next to class-usage-profile and
select one of the following:
destination-classes—To configure the class usage profile
to filter by source classes.
source-classes—To configure the class usage profile to filter
by destination classes.
8. In the Name box, enter the name of the source classes or the
destination classes.
9. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.