Role-Based Administration - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Related
Documentation

Role-Based Administration

Related
Documentation
4
The overall process for installing NSM is as follows:
Management System Installation Process
User Interface Installation Process
Refer to the Network Security Manager Installation Guide for details on the steps to install
the NSM management system on a single server or on separate servers. It also includes
information on how to install and run the NSM user interface. The Network Security
Manager Installation Guide is intended for IT administrators responsible for the installation
of or upgrade to NSM.
Introduction to Network and Security Manager on page 3
Role-Based Administration on page 4
NSM and Device Management Overview on page 5
The NSM role-based administration (RBA) feature enables you to define strategic roles
for your administrators, delegate management tasks, and enhance existing permission
structures using task-based functions.
Use NSM to create a secure environment that reflects your current administrator roles
and responsibilities. By specifying the exact tasks your NSM administrators can perform
within a domain, you minimize the probability of errors and security violations and enable
a clear audit trail for every management event.
For more detailed information about role-based administration, including using role-based
administration more effectively and configuring role-based administration, see
"Configuring Role-Based Administration" in the Network and Security Manager
Administration Guide.
Introduction to Network and Security Manager on page 3
Installing NSM on page 3
NSM and Device Management Overview on page 5
Copyright © 2010, Juniper Networks, Inc.