Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 175

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 65: Interfaces Configuration Fields (continued)
Option
Input Traffic Control Profile
Remaining
Output Traffic Control Profile
Output Traffic Control Profile
Remaining
Configuring CoS Classifiers (NSM Procedure) on page 124
Configuring CoS Code Point Aliases (NSM Procedure) on page 126
Configuring CoS Drop Profile (NSM Procedure) on page 127
Configuring CoS Forwarding Classes (NSM Procedure) on page 129
Configuring CoS Rewrite Rules (NSM Procedure)
Configuring CoS Schedulers (NSM Procedure) on page 141
Chapter 13: Configuring Class of Service Features
Function
Applies an input traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Applies an output traffic
scheduling and shaping profile
to the logical interface.
Applies an output traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Your Action
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Input Traffic
Control Profile Remaining .
4. Specify the comment and
profile name.
5. Click Ok.
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Output Traffic
Control Profile .
4. Specify the comment and
profile name.
5. Click Ok.
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Output Traffic
.
Control Profile Remaining
4. Specify the comment and
profile name.
5. Click Ok.
139