Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 271: IDS Configuration Details
Task
Specify the rule the router
uses when applying this
service.
Specify input conditions for
the IDS term.
Define the IDS term actions.
Your Action
1.
Click Rule next to Ids.
2. Click Add new entry next to Rule.
3. In the Name box, enter the identifier for the collection of terms
that constitute this rule.
4. In the Comment box, enter the comment.
5. From the Match Direction list, select the direction in which
the rule match is applied.
input—To apply the rule match on input.
output—To apply the rule match on output.
input-output—To apply the rule match bidirectionally.
6. Expand rule.
7. Click Term next to rule.
8. Click Add new entry next to Term.
9. In the Name box, enter the Identifier for the term.
10. In the Comment box, enter the comment.
1.
Expand term.
2. Click From next to term.
3. In the Comment box, enter the comment.
4. Expand From.
5. From the listed match conditions, select the ones that are
applicable for Ids.
The match conditions listed are Application Sets, Applications,
Destination Address, Destination Address Range, Destination
Prefix List, Source Address, Source Address Range, and Source
Prefix List.
1.
Click Then next to term.
2. In the Comment box, enter the comment.
3. Expand Then.
Chapter 23: Configuring Services
455
Advertisement
Table of Contents
