Table 270: Cos Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
452

Table 270: CoS Configuration Details

Task
Define a CoS application
profile.
Your Action
1. Click Application profile next to CoS.
2. Click Add new entry next to Application Profile.
3. In the Name box, enter the profile name.
4. In the Comment box, enter the comment.
5. Expand application-profile.
6. Click Ftp next to application profile.
7. In the Comment box, enter the comment.
8. Expand Ftp.
9. Click Data next to Ftp.
10. In the Comment box, enter the comment.
11. In the Dscp box, enter the DSCP value or alias.
12. In the Forwarding Class box, enter the forwarding class.
13. Click Sip next to Ftp.
14. In the Comment box, enter the comment.
15. Expand Sip.
16. Click Video next to Sip.
17. In the Comment box, enter the comment.
18. In the Dscp box, enter the name assigned to a set of CoS
markers.
19. In the Forwarding Class box, enter the name of the target
application.
20. Click Voice next to Sip.
21. In the Comment box, enter the comment.
22. In the Dscp box, enter the DSCP mapping that is applied to
the packets.
23. In the Forwarding Class box, enter the name of the target
application.
Copyright © 2010, Juniper Networks, Inc.