Table 198: Router Advertisement Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Network and security manager
Table of Contents

Advertisement

M-series and MX-series Devices
348

Table 198: Router Advertisement Configuration Details

Task
Configure router
advertisement properties on
an interface.
Your Action
1.
Click Interface next to Router Advertisement.
2. Click Add new entry next to Interface.
3. In the Name box, enter the name of an interface.
4. In the Comment box, enter the comment.
5. From the Max Advertisement Interval list, select the maximum
interval between each router advertisement message.
Range: 4 through 1800 seconds
Default: 600 seconds
6. From the Min Advertisement Interval list, select the minimum
interval between each router advertisement message.
Range: 3 seconds through three-quarter times the maximum
advertisement interval value
Default: One-third the maximum advertisement interval value
7. Select one of the following:
None—To skip the option.
managed-configuration—Enable host to use stateful
autoconfiguration.
no-managed-configuration—Disable host from using
stateful autoconfiguration.
8. Select one of the following:
None—To skip the option.
other-stateful-configuration—Enable autoconfiguration of
other nonaddress-related information.
no-other-stateful-configuration—Disable autoconfiguration
of other nonaddress-related information.
9. From the Reachable Time list, select the length of time that
a node considers a neighbor reachable until another
reachability confirmation is received from that neighbor.
Range: 0 through 3,600,000 milliseconds
Default: 0 milliseconds
10. From the Retransmit Timer list, select the retransmission
frequency of neighbor solicitation messages.
Range: 0 through 4,294,967,295 milliseconds
Default: 0 milliseconds
11. Select the Virtual Router Only check box to specify a virtual
router.
12. From the Current Hop Limit list, select the hop limit.
Range: 0 through 255
Default: 6
13. From the Default Lifetime list, select the default lifetime.
Range: Maximum advertisement interval value through 9000
seconds
Default: Three times the maximum advertisement interval
value
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-seriesMx-series

Table of Contents