Configuring Administrative Group (Nsm Procedure); Configuring Administrative Groups (Nsm Procedure); Table 143: Administrative Group Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Network and security manager
Table of Contents

Advertisement

M-series and MX-series Devices

Configuring Administrative Group (NSM Procedure)

Configuring Administrative Groups (NSM Procedure)

284
You can configure an administrative group constraint for each LSP or for each primary
or secondary LSP path using the Admin Group option.
To configure an administrative group in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols.
3.
Select Mpls.
4.
Add or modify settings as specified in Table 143 on page 284.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 143: Administrative Group Configuration Details

Task
Configure administrative
group.
Define the administrative
groups to exclude for an LSP
or for a path's primary and
secondary paths.
Require the LSP to traverse
links that include all of the
defined administrative
groups.
Define the administrative
groups to include for an LSP
or for a path's primary and
secondary paths.
You can configure administrative groups to implement link coloring of resource classes
using the Admin Groups option.
To configure administrative groups in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols.
3.
Your Action
1.
Click Admin Group next to Mpls.
2. In the Comment box, enter the comment.
1.
Click Exclude next to Admin Group.
2. Click Add new entry next to Exclude.
3. In the New exclude window, enter the names of one or more
groups.
1.
Click Include All next to Admin Group.
2. Click Add new entry next to Include All.
3. In the New include-all window, enter the names of one or more
groups.
1.
Click Include Any next to Admin Group.
2. Click Add new entry next to Include Any.
3. In the New include-any window, enter the names of one or
more groups.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-seriesMx-series

Table of Contents