Table of Contents
Advertisement
Related
Documentation
Configuring the LDAP Server (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 11: LDAP Options Configuration Details
Task
Configure lightweight
directory access protocol
options.
Derive user distinguished
name from common-name
and
base-distinguished-name.
Configuring the LDAP Server (NSM Procedure) on page 55
You can configure the Lightweight Directory Access Protocol (LDAP) server using the
LDAP Server option.
To configure LDAP server in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Access.
3.
Select Ldap Server.
4.
Add or modify settings as specified in Table 12 on page 56.
5.
Click one:
6.
Your Action
1.
In the Comment box, enter the comment.
2. From the Revert Interval list, select the amount of time the
router waits after a server has become unreachable.
Range: 60 through 4,294,967,295
Default: 600
3. In the Base Distinguished Name box, enter the suffix when
assembling user distinguished name (DN) or base DN under
which to search for user DN.
1.
Click Assemble next to Ldap Options.
2. Select one of the following:
assemble—To derive user distinguished name from
common-name and base-distinguished-name.
a. In the Comment box, enter the comment.
b. In the Common Name box, enter the common name.
search—To search for user's distinguished name.
a. In the Comment box, enter the comment.
b. In the Search Filter box, enter the filter to use in search.
c. Click Admin Search next to Search.
d. In the Comment box, enter the comment.
e. In the Distinguished Name box, enter the user
distinguished name.
f.
In the Password box, enter the password.
Chapter 7: Configuring Access
55
Advertisement
Table of Contents
