Table 263: Message Manipulate Rules Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
438
Configuring New Call Usage Policy Set (NSM Procedure) on page 442
Configuring New Transaction Policy (NSM Procedure) on page 443
Configuring a New Transaction Policy Set (NSM Procedure) on page 445
Configuring Timers (NSM Procedure) on page 446
Configuring Message Manipulation Rules (NSM Procedure)
To configure message manipulation rules in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Services > Border
3.
Signaling Gateway.
Select Gateway.
4.
Add or modify settings as specified in Table 263 on page 438.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 263: Message Manipulate Rules Configuration Details

Task
Configure a message
manipulation rule.
Configure a manipulation
rule.
Your Action
1. Click Add new entry next to Gateway.
2. Click Sip next to gateway.
3. In the Comment box, enter the comment.
4. Click Message Manipulation Rules next to Sip.
5. In the Comment box, enter the comment.
1. Click Manipulation Rule next to Message Manipulation Rules.
2. Click Add new entry next to Manipulation Rule.
3. In the Name box, enter the name of the manipulation rule.
4. In the Comment box, enter the comment.
5. Click Actions next to manipulation-rule.
6. In the Comment box, enter the comment.
7. Click Request Uri next to Actions.
8. In the Comment box, enter the comment.
9. Click Field Value next to Request Uri.
10. In the Comment box, enter the comment.
11. Click Modify Regular Expression next to Field Value.
12. Click Add new entry next to Modify Regular Expression.
13. In the Name box, enter the regular expression that you want
to modify.
14. In the Comment box, enter the comment.
15. In the With box, enter the regular expression that you want to
modify followed by the value with which you want to replace
the regular expression.
Copyright © 2010, Juniper Networks, Inc.