Table of Contents
Advertisement
M-series and MX-series Devices
Related
Documentation
Configuring Captive Portal (NSM Procedure)
Table 305: Captive Portal Configuration Details
Option
Comment
Authentication Profile
Name
500
Table 304: Stateful Firewall Configuration Details (continued)
Task
Define the rule set.
Configuring a Service Set (NSM Procedure) on page 494
The captive portal feature allows you to configure custom options, interface, and
traceoptions.
To configure the captive portal feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the captive portal feature.
Click the Configuration tab. In the configuration tree, select Services > Captive Portal.
3.
Configure the options as specified in Table 305 on page 500.
4.
Click one:
5.
OK — Saves the changes.
Cancel — Cancels the modifications.
Apply—Applies the captive portal parameters.
Function
Supplies a descriptive comment for the captive portal.
This is optional.
Specifies the access profile name used for
authentication.
Your Action
1.
Click Rule Set next to Stateful Firewall.
2. Click Add new entry next to Rule Set.
3. In the Name box, enter the identifier for the collection of rules
that constitute this rule set.
4. In the Comment box, enter the comment.
5. Click Rule next to rule-set.
6. Click Add new entry next to Rule.
7. From the Name list, select the identifier for the collection of
terms that constitute this rule.
8. In the Comment box, enter the comment.
Your Action
Enter a comment.
Select an authentication profile name
from the list.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
