Configuring The File Options (Nsm Procedure); Table 248: File Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Table 247: Traceoptions Configuration Details (continued)
Option
No Remote Trace

Table 248: File Configuration Details

Option Function
Comment Supplies a descriptive comment for the filename.
Filename Specifies the filename to write the traceoptions.
Size Specifies the maximum size of the trace file.
Files Specifies the maximum number of trace files.
None Specifies that neither the world-readable nor the
no-world-readable option is enabled.
world-readable Allows any user to read the log file.
no-world-readable Prevents any user from reading the log file.
Match Specifies the regular expression for the lines to be logged.
418
Function
Disables remote tracing.
You can now configure the following options:
Configuring the File Options (NSM Procedure) on page 418
Configuring Flag Options (NSM Procedure) on page 419

Configuring the File Options (NSM Procedure)

To configure the file options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the file options.
Click the Configuration tab. In the configuration tree, select Security > Pki >
3.
Traceoptions > File.
Configure the file options as specified in Table 248 on page 418.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the file settings.
Your Action
Select the No Remote Trace check box to enable
this feature.
Your Action
Enter a comment.
Enter a filename.
Enter the maximum file size.
Set the maximum number of trace files.
Range: 2 through 1000.
Select the option.
(Optional) Select the option.
(Optional) Select the option.
Enter the match expression.
Copyright © 2010, Juniper Networks, Inc.