Table of Contents
Advertisement
M-series and MX-series Devices
Configuring Session Mirroring (NSM Procedure)
Configuring Media Service (NSM Procedure)
488
You can configure the session mirroring feature using the Session Mirroring option.
To configure session mirroring in NSM:
In the navigation tree select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
In the Configuration tab, expand Services > Pgcp.
3.
Select Gateway.
4.
Add or modify the settings as specified in Table 295 on page 488.
5.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Table 295: Session Mirroring Configuring Details
Task
Configure the delivery
function that receives the
session mirroring information.
You can configure media services for the Border gateway Function (BGF) configuration.
Media services are applied to Packet Gateway Control Protocol (PGCP) packets.
To configure media service in NSM:
In the navigation tree select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
In the Configuration tab, expand Services > Pgcp.
3.
Select Media Service.
4.
Add or modify the settings as specified in Table 296 on page 489.
5.
Click one:
6.
OK—To save the changes.
Your Action
1.
Click Add new entry next to Gateway.
2. Click Session Mirroring next to gateway.
3. In the Comment box, enter the comment.
4. Select the Disable Session Mirroring check box to disable the
session mirroring feature.
5. Expand Session Mirroring.
6. Click Delivery Function next to Session Mirroring.
7. Click Add new entry next to Delivery Function.
8. In the New delivery-function window, enter the name of the
delivery function that receives the session mirroring
information.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
