Table 44: Vlan Id Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Copyright © 2010, Juniper Networks, Inc.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 44: VLAN ID Configuration Details

Task
Configure a VLAN ID
Chapter 10: Configuring Bridge Domains
Your Action
1. Click Add new entry next to Domain.
2. Click Vlan Id.
3. Select vlan-id and enter the VLAN ID.
4. Select vlan tag to tag the VLAN interface so that it can be
compared with the normalizing VLAN identifier.
5. In the Comment box, enter the comment.
6. In the Inner box, enter the VLAN identifier.
7. In the Outer box, enter the VLAN identifier.
97