Configuring A Flow (Nsm Procedure); Table 225: Firewall Authentication Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 225: Firewall Authentication Configuration Details

Option Function
Name Specifies the trace flag name.
Comment Supplies a descriptive comment for the trace flag.
None Specifies that the flag options does not belong to any of the
other options type such as terse, detail, or extensive.
Terse Specifies brief traceoptions information.
Detail Specifies detailed traceoptions information.
Extensive Specifies extensive traceoptions information.
Related
Documentation

Configuring a Flow (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Click the Configuration tab. In the configuration tree, select Security > Firewall
3.
Authentication.
Enter a comment in the Firewall Authentication workspace that describes the firewall
4.
authentication.
In the configuration tree, select Security > Firewall Authentication > Traceoptions.
5.
Enter a comment in the Traceoptions workspace that describes the traceoptions.
6.
In the configuration tree, select Security > Firewall Authentication > Traceoptions
7.
> Flag.
Add or modify settings as specified in Table 225 on page 393.
8.
Click one:
9.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the traceoptions settings.
Configuring Certificates (NSM Procedure) on page 390
Configuring a Flow (NSM Procedure) on page 393
Configuring the Forwarding Options (NSM Procedure) on page 400
The flow feature allows you to configure bridge, TCP MSS, TCP session, and traceoptions.
To configure the flow feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the flow options.
Chapter 22: Configuring Security
Your Action
Select a flag name from the list.
(Optional) Enter a comment.
Select the option.
Select the option.
Select the option.
Select the option.
393