Table 183: Mstp Configuration Fields - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 183: MSTP Configuration Fields

Option
Disable
Configuration Name
Revision Level
Max Hops
Max Age
Hello time
Forward Delay
Bridge Priority
Bpdu Block on Edge
Copyright © 2010, Juniper Networks, Inc.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See Updating
Devices for more information.
Function
Specifies whether MSTP must be
disabled on the port.
Specifies the configuration name.
Specifies the configuration revision level.
Specifies the number of hops in a region
before the BPDU is discarded.
Specifies the maximum-aging time for
all MST instances. The maximum aging
time is the number of seconds a switch
waits without receiving spanning-tree
configuration messages before
attempting a reconfiguration.
Specifies the hello time for all MST
instances.
Specifies the number of seconds a port
waits before changing from its
spanning-tree learning and listening
states to the forwarding state.
Specifies the bridge priority.
Specifies whether Bpdu blocks must be
processed.
Chapter 20: Configuring Protocols
Your Action
Click to select the option.
Type a name.
Select a value.
Select a value.
Select a value.
Select a value.
Select a value.
Enter a value.
Select to enable the feature.
331