Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 277

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 124: Multicast Snooping Options Configuration Details (continued)
Task
Configure tracing options.
Configuring Interfaces on the Routing Platform (NSM Procedure) on page 209
Chapter 18: Configuring Multicast Snooping Options
Your Action
1. Click Traceoptions next to Multicast Snooping Options.
2. In the Comment box, enter the comments.
3. Expand Traceoptions.
4. Click File next to Trace Options.
5. In the Comment box, enter the comments.
6. In the Filename box, enter the name of the file to receive the
output of the tracing operation. Enclose the name within
quotation marks.
7. In the Size box, enter the maximum size of each trace file in
bytes.
Range : 10240 to 4294967295 bytes
8. From the Files list, select the maximum number of files.
9. Select the world-readable option to enable log file access to
all users.
10. Select the no-world-readable option to prevent all users from
reading the log file.
11. Click Flag next to Trace Options.
12. Click Add new entry next to flag.
13. From the Name list, select a tracing operation to perform.
14. In the Comment box, enter the comments.
241