Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 140: LDP Configuration Details (continued)
Task
Enable OAM for all of the
LDP LSPs or for a specific
LDP LSP.
Your Action
1.
Click Oam next to LDP.
2. In the Comment box, enter the comment.
3. From the Lsp Ping Interval list, select the time interval between
LSP ping messages.
Range : 30 through 3600
4. Click Bfd Liveness Detection next to Oam.
5. In the Comment box, enter the comment.
6. From the Version list, select the BFD protocol version to detect.
Range: 1 (BFD version 1), or automatic (autodetection) Default:
automatic
7. From the Minimum Interval list, select the minimum transmit
and receive interval.
Range: 1 through 255,000
8. From the Minimum Receive Interval list, select the minimum
receive interval.
Range: 1 through 255,000
9. From the Multiplier list, select the detection time multiplier.
Range: 1 through 255
Default: 3
10. Select the No Adaptation check box to disable BFD adaptation.
11. Select the Ecmp check box to cause RSVP to establish BFD
sessions for all ECMP paths configured for the specified FEC.
12. From the Holddown Interval list, select the time the BFD
session must remain up before state change notification is
sent.
Range: 1 through 255000
13. Click Detection Time next to Bfd Liveness Detection.
14. In the Comment box, enter the comment.
15. From the Threshold list, select the time the BFD session must
remain up before state change notification is sent.
Range: 1 through 4294967295
Chapter 20: Configuring Protocols
271
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1