Table of Contents
Advertisement
Table 209: Interface Routes Fields (continued)
Option
Family
Rib Group
Configuring Martian Addresses (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies the address family as IPv4 or
IPv6.
Specifies the routing table groups to
which interface routes are imported.
Martian addresses are host or network addresses about which all routing information is
ignored. They commonly are sent by improperly configured systems on the network and
have destination addresses that are obviously invalid. You can configure a particular
martian address or a range of martian addresses as allowed or disallowed. You can use
the match criteria to configure a range of martian addresses.
To configure a martian address in NSM:
In the navigation tree, select
1.
In the
Devices
list, double click the device to select it.
2.
Click the
3.
Configuration
In the configuration tree, expand
4.
Select
.
5.
Martians
Add or modify the parameters as specified in Table 210 on page 374.
6.
Click one:
7.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Your Action
1.
2. Click the New button or select a
3. Enter the family name and comment.
4. Set up the export policy and import
1.
2. Enter the comment and Inet.
Device Manager > Devices
tab.
Routing Options
.
Chapter 21: Configuring Routing Options
Expand the
tree and
Interface Routes
select
.
Family
family name and click the Edit
button.
policy.
Expand the
tree and
Interface Routes
select
Rib Group
.
.
373
Advertisement
Table of Contents
