M-series and MX-series Devices
Configuring Rule Set (NSM Procedure)
Configuring Session Mirroring (NSM Procedure)
490
You can specify the rule set the router uses when applying this service.
To configure Rule Set in NSM:
In the navigation tree select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
In the Configuration tab, expand Services > Pgcp.
3.
Select Rule Set.
4.
Add or modify the settings as specified in Table 298 on page 490.
5.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Table 298: Configuring Rule Set
Task
Configure a rule set.
You can configure the session mirroring feature using the session mirroring option.
To configure session mirroring in NSM:
In the navigation tree select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
In the Configuration tab, expand Services > Pgcp.
3.
Select Session Mirroring.
4.
Add or modify the settings as specified in Table 299 on page 491.
5.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Your Action
1.
Click Add new entry next to Rule Set.
2. In the Name box, enter the identifier for the collection of rules
that make up this rule set.
3. In the Comment box, enter the comment.
4. Expand rule-set.
5. Click Rule next to rule-set.
6. Click Add new entry next to Rule.
7. From the Name list, select the identifier for the rule.
8. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.