Configuring A Policy (Nsm Procedure); Table 236: Policy Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Table 235: Gateway Configuration Details (continued)
Option Function
inet Specifies IPv4 traffic.
hostname Specifies the hostname
user-at-hostname Specifies the e-mail address.
distinguished-name Specifies the distinguished name.
gateway > Xauth
Comment Supplies a descriptive comment for the
gateway authentication.
Access Profile Specifies the access profile that contains the
authentication information.

Configuring a Policy (NSM Procedure)

Table 236: Policy Configuration Details

Option
Policy
Name
Comment
Mode
Description
Proposal Set
404
To configure the policy option:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the policy option.
Click the Configuration tab. In the configuration tree, select Security > Ike > Policy.
3.
Add or modify settings as specified in Table 236 on page 404.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the policy settings.
Function
Specifies the name of the policy.
Supplies a descriptive comment for the policy.
Defines the IKE mode for phase 1.
Specifies a text description for the IKE policy.
Specifies the type of the default IKE proposal set.
Your Action
Select the option.
Select the option.
Select the option.
Select the option.
(Optional) Enter a comment.
Select the access profile from the list.
Your Action
Enter the policy name.
(Optional) Enter a comment.
Select the mode from the list.
Enter a Description.
Select the proposal set from the list.
Copyright © 2010, Juniper Networks, Inc.