Table of Contents
Advertisement
Configuring the Firewall Filter for Ccc Family Type (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Configuring Filters for inet Family Type (NSM Procedure) on page 167
Configuring Filters for inet6 Family Type (NSM Procedure) on page 172
Configuring the Firewall Filter for MPLS Family Type (NSM Procedure) on page 176
On the MX Series router, you can filter Layer 2 packets in a bridging environment using
this option.
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Firewall > Family > Ccc.
3.
Add or modify settings as specified in Table 80 on page 165.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 80: Ccc Filter Configuration Details
Task
Configure firewall filters for
Layer 2 switching
cross-connects.
Configure accounting for
firewall filter.
Your Action
1.
Click Filter next to Ccc.
2. Click Add new entry next to Filter.
3. Expand Filter.
4. In the name box, enter the name that identifies the filter.
5. In the Comment box, enter the comment.
6. Select the Interface Specific check box to configure
interface-specific names for firewall counters.
1.
Click Accounting Profile next to filter.
2. Click Add new entry next to Accounting Profile.
3. In the New accounting-profile window, enter the name to be
assigned to the accounting profile.
Chapter 15: Configuring Firewall
165
Advertisement
Table of Contents
