Configuring Authentication Order (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Related
Documentation

Configuring Authentication Order (NSM Procedure)

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 53: TACACS+ Authentication Configuration Details (continued)
Option Function
Secret Specifies the shared secret (password) of the
TACACS+ server. The secret is stored as an
encrypted value in the configuration database.
Source Specifies the source address to be included in
Address the TACACS+ server requests by the device. In
most cases, you can use the loopback address
of the device.
Configuring RADIUS Authentication (NSM Procedure) on page 115
Configuring Authentication Order (NSM Procedure) on page 117
Configuring User Access (NSM Procedure) on page 118
You can configure the device so that user authentication occurs with the local password
first, then with the RADIUS server, and finally with the TACACS+ server.
To configure authentication order:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab and then double-click the device for which you want to
2.
configure authentication order.
Click the Configuration tab. In the configuration tree, select System > Authentication
3.
Order.
In the Authentication Order workspace, click the New button. The New
4.
authentication-order list appears.
To add RADIUS authentication to the authentication order, select radius from the
5.
New authentication-order list.
To add TACACS+ authentication to the authentication order, select tacplus from the
6.
New authentication-order list.
To add Password authentication to the authentication order, select password from
7.
the New authentication-order list.
OK—Saves the changes.
Cancel—Cancels the modifications.
Configuring RADIUS Authentication (NSM Procedure) on page 115
Configuring TACACS+ Authentication (NSM Procedure) on page 116
Configuring User Access (NSM Procedure) on page 118
Chapter 12: Configuring Authentication
Your Action
Enter the shared secret of the
TACACS+ server.
Enter the loopback address of
the device.
117