Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 87: MPLS Firewall Filter Configuration Details
Task
Configure a firewall filter to
filter MPLS packets.
Configure accounting for
firewall filters.
Your Action
1.
Click Filter next to MPLS.
2. Click Add new entry next to Filter.
3. Expand Filter.
4. In the Name box, enter the name that identifies the filter.
5. In the Comment box, enter the comment.
6. Select the Interface Specific check box to configure
interface-specific names for firewall counters.
1.
Click Accounting Profile next to filter.
2. Click Add new entry next to Accounting Profile.
3. In the New accounting-profile window, enter the name to be
assigned to the accounting profile.
Chapter 15: Configuring Firewall
177
Advertisement
Table of Contents
