Table of Contents
Advertisement
M-series and MX-series Devices
496
Table 303: Service Set Configuration Details (continued)
Task
Specify the intrusion
detection service (IDS) rules
or rule set included in this
service set.
Specify the device name for
the interface service PIC.
Specify the Network Address
Translation (NAT) rules or
rule set included in this
service set.
Your Action
1.
Click Ids Rules next to service-set.
2. Select one of the following:
ids—rules—To specify the ids rules.
ids-rule-sets—To specify the ids-rule-sets.
3. Click Add new entry.
4. From the Name list, select the rule or rule set name.
5. In the Comment box, enter the comment.
1.
Click Interface Service next to service-set.
2. Select one of the following:
interface-service—To specify the device name for the
interface service Physical Interface Card.
a. In the Comment box, enter the comment.
b. In the Services Interface box, enter the name of the
service device associated with the interface-wide service
set.
next-hop-service—To specify interface names or a service
interface pool for the forwarding next-hop service set. You
cannot specify both a service interface pool and an inside
or outside interface.
a. In the Comment box, enter the comment.
b. In the Inside Service Interface box, enter the name and
logical unit number of the service interface associated
with the service set applied inside the network.
c. In the Outside Service Interface box, enter the name
and logical unit number of the service interface
associated with the service set applied outside the
network
d. From the Service Interface Pool list, select the name of
the pool of logical interfaces.
1.
Click Nat Rules next to service-set.
2. Select one of the following:
nat-rules—To specify the NAT rules included in this service
set.
nat-rule-sets—To specify the NAT rule set included in this
service set.
3. Click Add new entry.
4. From the Name list, select the rule or rule set name.
5. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1