Configuring Relay Option 60 Information For Forwarding Client Traffic To; Specific Dhcp Servers (Nsm Procedure); Table 94: Relay Option 60 Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Configuring Relay Option 60 Information for Forwarding Client Traffic to Specific DHCP Servers
(NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
You can configure the extended DHCP relay agent to use the DHCP vendor class identifier
option (option 60) in DHCP client packets to forward client traffic to specific DHCP
servers or to drop selected DHCP client packets. This feature is useful in network
environments where DHCP clients access services provided by multiple vendors and
DHCP servers.
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the tree, expand Forwarding Options > DHCP Relay.
3.
Select Relay Option 60.
4.
Add or modify settings as specified in Table 94 on page 191.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 94: Relay Option 60 Configuration Details

Task
Configure the match criteria
when you use the DHCP
vendor class identifier option
(option 60) in DHCP client
packets to forward client
traffic to specific DHCP
servers.
Chapter 16: Configuring Forwarding Options
Your Action
1. In the Comment box, enter the comment for the relay option
60.
2. Click Vendor Option next to Relay Option 60.
3. In the Comment box, enter the comment for Vendor Option.
4. Click Default Relay Server Group next to Vendor Option and
select the name of the default DHCP relay server group.
Select Drop to drop DHCP client packets that contain an
option 60 string that matches the ASCII or hexadecimal
match string and match criteria.
191