Table 60: Drop Profile Configuration Fields - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices

Table 60: Drop Profile Configuration Fields

Option
Drop Profile
Name
Comment
Fill Level
Name
128
Click the Configuration tab. In the configuration tree expand Class of Service.
3.
Select Drop Profiles.
4.
Add or modify the drop profiles as specified in Table 60 on page 128.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function
Specifies the drop profile name.
Specifies the comment for the drop
profile.
Specifies the fill level for the drop profile.
Your Action
1. Click the New button or Edit button
in the Drop Profile interface.
2. Enter the drop profile name in the
Name box.
1. Click the New button or Edit button
in the Drop Profile interface.
2. Enter the comment for the drop
profile in the Comment box.
1. On Drop Profile interface click the
New button or select a profile and
click the Edit button.
2. Expand the Drop Profile tree and
select Fill Level.
3. Click the New button or select a fill
level and click the Edit button.
4. Select a value from Name list.
Copyright © 2010, Juniper Networks, Inc.