Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 265: New Call Usage Policy Set Configuration Details (continued)
Task
Define the new call usage
policies.
Configuring New Transaction Policy (NSM Procedure)
To configure new transaction policy in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Services > Border
3.
Signaling Gateway.
Select Gateway.
4.
Add or modify settings as specified in Table 266 on page 443.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
NOTE: For devices running JUNOS Release 9.5 and later, new transaction
policy settings will be available in the device editor only when the
policy-management mode is in-device mode. By default, new transaction
policy settings can be created only in the Policy Manager and Object Manager.
Table 266: Transaction Policy Configuration Details
Task
Configure new transaction
policy.
Define the new transaction
policy term properties.
Your Action
1.
Click Policy Name next to new-call-usage-policy-set.
2. Click Add new entry next to Policy Name.
3. In the New policy-name window, enter the names of one or
more new call usage policies that you want to add to the set.
Syntax: To specify a list of policies, enclose the policy names
in brackets.
Your Action
1.
Click Add new entry next to Gateway.
2. Click Sip next to gateway.
3. In the Comment box, enter the comment.
4. Click New Transaction Policy next to Sip.
5. Click Add new entry next to New Call Transaction Policy.
6. In the Name box, enter the identifier for the new transaction
policy.
7. In the Comment box, enter the comment.
1.
Click Term next to new-transaction-policy.
2. Click Add new entry next to Term.
3. In the Name box, enter the identifier for the term.
4. In the Comment box, enter the comment.
Chapter 23: Configuring Services
443
Advertisement
Table of Contents
