Table of Contents
Advertisement
M-series and MX-series Devices
Table 340: Internet Options Configuration Details (continued)
Option
None / path-mtu-discovery /
no-path-mtu-discovery
None /
gre-path-mtu-discovery /
no-gre-path-mtu-discovery
None /
ipip-path-mtu-discovery /
no-ipip-path-mtu-discovery
None / source-quench /
no-source-quench
Tcp Drop Synfin Set
No Tcp Rfc1323
No Tcp Rfc1323 Paws
546
Function
Specifies that you can determine the
Maximum Transmission Unit (MTU) size
on the network path between two IP hosts.
Specifies that you can configure a path
MTU discovery for outgoing Generic
Routing Encapsulation (GRE) tunnel
connections.
Specifies that you can configure path MTU
discovery for outgoing IP-IP tunnel
connections.
Specifies that you can configure how the
Junos OS would handle the Internet
Control Message Protocol (ICMP) source
quench messages.
Specifies that the TCP packets that have
both SYN and FIN flags can be dropped.
Specifies that you can configure the Junos
OS to disable RFC 1323 TCP extensions.
Specifies that you can configure the Junos
OS to disable the RFC 1323 Protection
Against Wrapped Sequence (PAWS)
number extension.
Your Action
Select an option.
path-mtu-discovery-Path MTU discovery is
enabled.
no-path-mtu-discovery-Path MTU discovery
is disabled.
None-Path MTU discovery is neither enabled
nor disabled.
Select an option.
gre-path-mtu-discovery-GRE path MTU
discovery is enabled.
no-gre-path-mtu-discovery-GRE path MTU
discovery is disabled.
None-GRE path MTU discovery is neither
enabled nor disabled.
Select an option.
ipip-path-mtu-discovery-IP-IP path MTU
discovery is enabled.
no-ipip-path-mtu-discovery-IP-IP path MTU
discovery is disabled.
None-IP-IP path MTU discovery is neither
enabled nor disabled.
Select an option:
source-quench-The Junos OS ignores the
ICMP source quench messages.
no-source-quench-The Junos OS does not
ignore the ICMP source quench messages.
None-ICMP source quench message is neither
enabled nor disabled.
Select Tcp Drop Synfin Set to enable this feature.
Select No Tcp Rfc1323 to enable this feature.
Select No Tcp Rfc1323 Paws to enable this
feature.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1