Table 202: Vstp Configuration Fields - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices

Table 202: VSTP Configuration Fields

Field
VSTP
Comment
Disable
Bridge Priority
Max Age
Hello Time
Forward Delay
Interface
Traceoptions
360
Function
Specifies comment for OSPF.
Specifies whether to disable the VSTP
configuration.
The bridge priority determines which
bridge is elected as the root bridge. If two
bridges have the same path cost to the
root bridge, the bridge priority
determines which bridge becomes the
designated bridge for a LAN segment.
Specifies the maximum age of received
protocol BPDUs.
The time interval at which the root bridge
transmits configuration BPDUs.
Specifies how long a bridge interface
remains in the listening and learning
states before transitioning to the
forwarding state.
Specifies the interface to be associated
with VSTP.
Enables you to configure VSTP level
tracing options.
Your Action
1. Expand the Protocol tree and select
.
VSTP
2. Enter the comment.
1. Expand the Protocol tree and select
VSTP .
2. Specify whether to disable VSTP.
1. Expand the tree and select
Protocol
.
VSTP
2. Enter the bridge priority.
1. Expand the tree and select
Protocol
VSTP .
2. Enter the max age or select from the
list.
1. Expand the tree and select
Protocol
.
VSTP
2. Enter the hello time or select from
the list.
1. Expand the Protocol tree and select
VSTP .
2. Enter the forward delay time or
select from the list.
1. Expand the tree.
Protocol
2. Select VSTP and expand the tree.
3. Select Interfaces .
4. Set up the priority, cost, mode, edge
and specify whether the interface has
to be disabled.
1. Expand the tree.
Protocol
2. Select and expand the tree.
VSTP
3. Select Traceoptions .
4. Set up the file and flag parameters.
Copyright © 2010, Juniper Networks, Inc.