M-series and MX-series Devices
Table 323: Probe Configuration Options (continued)
Option
Function
url
Specifies the URL of the remote server that is being
probed by the RPM test.
probe > test > Thresholds
Comment
Specifies a comment for the threshold.
Successive Loss
Specifies the number of successive probe losses,
which indicates successive failure.
Total Loss
Specifies total number of probe losses, which
indicates test failure.
Rtt
Specifies the maximum round-trip time per probe.
Jitter Rtt
Specifies the maximum jitter per test.
Std Dev Rtt
Specifies the maximum standard deviation per test.
Egress Time
Specifies maximum source-to-destination time per
probe.
Ingress Time
Specifies maximum destination-to-source time per
probe.
Jitter Ingress
Specifies maximum destination-to-source jitter per
test.
Jitter Egress
Specifies maximum source-to-destination jitter per
test.
Std Dev Ingress
Specifies maximum destination-to-source standard
deviation per test.
Std Dev Egress
Specifies maximum source-to-destination standard
deviation per test.
probe > test > Traps
520
Your Action
Select the option and enter the URL.
Enter a comment.
Enter the value or select it from the list.
Range: 0 through 15.
Enter the value or select it from the list.
Range: 0 through 15.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Enter the value or select it from the list.
Range: 0 through 60000000.
Copyright © 2010, Juniper Networks, Inc.