Table of Contents
Advertisement
M-series and MX-series Devices
Configuring CoS Routing Instances (NSM Procedure)
140
Configuring CoS and Applying Scheduler Maps (NSM Procedure) on page 143
You can apply a custom MPLS EXP classifier to the routing instance with VPN routing
and forwarding (VRF) table labels enabled using this option. The default MPLS EXP
classifier or one that is previously defined can be applied for routing instance.
To configure Class-of-Service routing instances in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Class of Service.
3.
Select Routing Instances.
4.
Add or modify settings as specified in Table 66 on page 140.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 66: Routing Instances Configuration Details
Task
Apply a custom MPLS EXP
classifier to the routing
instance for routing
instances with VRF table
labels enabled.
Specify the classifier name.
Your Action
1.
Click Add new entry next to Routing Instances.
2. In the Name box, enter the name of the routing instance.
1.
Click Classifiers next to routing-instances.
2. Click Dscp next to Classifiers.
3. In the Comment box, enter the comment.
4. From the Classifier name list, select the classifier name.
5. Click Dscp Ipv6 next to Classifiers.
6. In the Comment box, enter the comment.
7. From the Classifier name list, select the classifier name.
8. Click Exp next to Classifiers.
9. From the Classifier Name list, select the classifier name.
10. Click Ieee 802.1 next to Classifiers.
11. In the Comment box, enter the comment.
12. From the Classifier name list, select the classifier name.
13. From the Vlan tag list, select the VLAN tag.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
