Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 258

M-series and MX-series Devices
222
Table 116: Inet Family Configuration Details (continued)
Task Your Action
Configure a 1. Click Preempt next to vrrp-group.
backup router to
2. Select preempt to allow the master router to be preempted.
preempt the
a. In the Comment box, enter the comment.
master router.
b. From the Hold Time list, select the hold time before a higher-priority
backup router preempts the master router.
3. Select no-preempt to prohibit the preemption of the master router.
4. Click Track next to vrrp-group.
5. In the Comment box, enter the comment.
6. From the Priority Hold Time list, select the minimum length of time that
must elapse between dynamic priority changes.
Range: 1 through 3600 seconds
7. Click Interface next to Track.
8. Click Add new entry next to Interface.
9. In the Name box, enter the interface name.
10. In the Comment box, enter the comment.
11. From the Priority Cost list, select the VRRP routers' priority cost for
becoming the master default router. The router with the highest priority
within the group becomes the master.
Range: 1 through 254
Copyright © 2010, Juniper Networks, Inc.