Configuring The File Options (Nsm Procedure); Configuring Flag Options (Nsm Procedure); Table 256: File Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 256: File Configuration Details

Option Function
Comment Supplies a descriptive comment for the filename.
Filename Specifies the filename to write the traceoptions.
Size Specifies the maximum size of the trace file.
Files Specifies the maximum number of trace files.
None Specifies that neither the world-readable nor the
no-world-readable option is enabled.
world-readable Allows any user to read the log file.
no-world-readable Prevents any user from reading the log file.
Match Specifies the regular expression for the lines to be
logged.
Copyright © 2010, Juniper Networks, Inc.

Configuring the File Options (NSM Procedure)

To configure file options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the file options.
Click the Configuration tab. In the configuration tree, select Security > Nat >
3.
Traceoptions > File.
Configure the file options as specified in Table 256 on page 429.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the file settings.

Configuring Flag Options (NSM Procedure)

To configure flag options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure flag options.
Click the Configuration tab. In the configuration tree, select Security > Nat >
3.
Traceoptions > Flag.
Chapter 22: Configuring Security
Your Action
(Optional) Enter a comment.
Enter a filename.
Enter the maximum file size.
Set the maximum number of trace files.
Range: 2 through 1000.
Select the option.
(Optional) Select the option.
(Optional) Select the option.
Enter the match expression.
429