Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 548

M-series and MX-series Devices
Table 316: Peer Configuration Details (continued)
Option
Comment
Peer > Ip Address > Spi > Replay Method >
None
timestamp
none (configuration)
Peer > Nai
Name
Comment
Peer > Nai > Spi
Name
Comment
Peer > Nai > Spi > Algorithm
Comment
none
hmac-md5
md5
Peer > Nai > Spi > Entity Type
Comment
none
512
Function
Specifies the comment for the replay method.
Timestamp
Specifies that the timestamp option is not enabled
Enables the timestamp option.
Specifies that the configuration option is not
selected.
Specifies the name for the NAI.
Specifies the comment for the NAI.
Specifies the SPI value.
Specifies the comment for the SPI value.
Specifies the comment for the algorithm.
Specifies that neither the hmac-md5 or md5 option
is specified for the algorithm.
Specifies hash algorithm that authenticates packet
data.
Produces a 128-bit digest.
Specifies the comment for the entity type.
Specifies that neither the host or the mobility-agent
entity type is enabled.
Your Action
Enter a comment.
Select the option.
1. Select the option.
2. Enter a comment for the timestamp.
3. Enter the timestamp receive duration.
Range: 1 through 255.
Select the option.
Enter a name in the following format:
@domain.com
user@domain.com
Enter a comment.
Enter the SPI value in hexadecimal format.
(0–9, a-f, A-F).
Enter a comment.
Enter a comment.
Select the option.
Select the option.
Select the option.
Enter a comment.
Select the option.
Copyright © 2010, Juniper Networks, Inc.