Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 236

M-series and MX-series Devices
200
Table 100: BOOTP Configuration Details (continued)
Task
Specify the interface for a DHCP
and BOOTP relay agent.
Your Action
1. Click Interface next to BOOTP.
2. Click Add new entry next to Interface.
3. Expand Interface.
4. In the Name box, enter the interface for a DHCP and
BOOTP relay agent.
5. In the Comment box, enter the comment.
6. Select the No Listen check box to disable recognition of
DNS requests or stop packets from being forwarded on a
logical interface, a group of logical interfaces, or a router.
7. Select the Broadcast check box to issue the DHCP or
BOOTP request as a broadcast message.
8. In the Descriptions box, enter the description of BOOTP,
DHCP, Domain Name System (DNS), or Trivial File Transfer
Protocol (TFTP) service, or of an interface that is
configured for the service.
9. From the Maximum Hop Count list, select the maximum
number of hops allowed.
Default: 4 hops
10. From the Minimum Wait Time list, select the minimum
time allowed.
Default: 3 seconds
11. From the Client Response Ttl list, select the IIP time-to-live
(TTL) value in DHCP response packets sent to a DHCP
client.
Copyright © 2010, Juniper Networks, Inc.