Table of Contents
Advertisement
M-series and MX-series Devices
Related
Documentation
Device States Displayed in Job Manager During Update
36
Job Type—The type of task being tracked. Job types include Update Device, Reboot
Device, and Config Summary. Job type is also known as a directive.
Timestamp—The time at which NSM began executing the directive.
Admin Name—The name of the administrator logged into NSM.
Status—The current state of the job.
Completion—The number of jobs completed out of the total number of jobs.
Percent—The percentage of total jobs successfully executed. When performing multiple
jobs on multiple devices, this field displays the percentage complete for each device.
When the job has completed, successfully or unsuccessfully, this field displays 100%.
Name—The name of the device on which the job is executed.
Description—The current state of the job.
Completion—The percentage of a job that has executed successfully.
Output—Displays the content of the update, including commands that have been
interpreted from the NSM data model into device-specific commands, error messages,
and existing commands deleted from the device. The Output Display Region displays
all errors, warnings, device verification output, and device state information associated
with the job.
NOTE: If the Job Information dialog box might contain Chinese, Japanese, or
Korean characters, you must uncheck the Fixed Font box to display them.
NOTE: Job Manager configuration summaries and job information details do
not display passwords in the list of CLI commands for administrators that
do not have the assigned activity "View Device Passwords." By default, only
the super administrator has this assigned activity.
About Updating M-series and MX-series Devices on page 31
How the Update Process Works on page 32
Job Manager on page 33
Tracking Updated Devices Using Job Manager on page 34
Device States Displayed in Job Manager During Update on page 36
Understanding Updating Errors Displayed in the Job Manager on page 37
During an update, the managed device changes device state. You can view the current
device state in real time in the State Description field of the Job Information dialog box.
Table 6 on page 37 lists the states that a device can have.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
