M-series and MX-series Devices
440
Cancel—Cancels the modifications.
Table 264: New Call Usage Policy Configuration Details
Task
Configure a new call usage
policy.
Define the new call usage
policy term properties.
Your Action
1.
Click Add new entry next to Gateway.
2. Click Sip next to gateway.
3. In the Comment box, enter the comment.
4. Click New Call Usage Policy next to Sip.
5. Click Add new entry next to New Call Usage Policy.
6. In the Name box, enter the identifier for the new call usage
policy.
7. In the Comment box, enter the comment.
1.
Click Term next to new-call-usage-policy.
2. Click Add new entry next to Term.
3. In the Name box, enter the identifier for the term.
4. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.