Table 77: Event Options Traceoptions Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Related
Documentation
160
Add or modify settings as specified in Table 77 on page 160.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 77: Event Options Traceoptions Configuration Details

Task
Define tracing operations for
event policy.
Specify the name of the file
to receive the output of the
tracing operation and the
maximum number of trace
files.
Specify the tracing operation
to perform.
Configuring Destinations for File Archiving (NSM Procedure) on page 153
Configuring Event Script (NSM Procedure) on page 154
Generating Internal Events (NSM Procedure) on page 156
Configuring Event Policy (NSM Procedure) on page 156
Your Action
1. In the Comment box, enter the comment for the traceoptions.
2. Select the No Remote Trace check box to disable remote
tracing globally or for a specific tracing operation.
1. Click File next to Traceoptions.
2. In the Comment box, enter the comment for the file.
3. In the Filename box, enter the name of the file to receive the
output of the tracing operation.
4. In the Size box, enter the maximum size of each trace file, in
kilobytes (KB), megabytes (MB), or gigabytes (GB).
5. From the Files list, select the maximum number of trace files.
Range: 2 through 1000.
6. Select one of the following:
world-readable—To enable unrestricted file access.
no-world-readable—To restrict file access to owner. This
is the default setting.
7. In the Match box, enter the regular expression.
1. Click Flag next to Traceoptions.
2. Click Add new entry next to Flag.
3. From the Name list, select the flag.
4. In the Comment box, enter the comment for the flag.
Copyright © 2010, Juniper Networks, Inc.