Table of Contents
Advertisement
Configuring Firewall Filter for inet6 Family Type (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
You can specify inet6 to filter IP version 6 (IPv6) packets.
To configure the firewall filter in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Firewall > Family >
3.
Inet6.
Add or modify settings as specified in Table 85 on page 173.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 85: Inet6 Firewall Filter Configuration Details
Task
Configure firewall filter to
filter IPv6 packets.
Configure accounting for
firewall filters.
Your Action
1.
Click Filter next to Inet6.
2. Click Add new entry next to Filter.
3. Expand Filter.
4. In the Name box, enter the name that identifies the filter.
5. In the Comment box, enter the comment.
6. Select the Interface Specific check box to configure
interface-specific names for firewall counters.
1.
Click Accounting Profile next to filter.
2. Click Add new entry next to Accounting Profile.
3. In the New accounting-profile window, enter the name to be
assigned to the accounting profile.
Chapter 15: Configuring Firewall
173
Advertisement
Table of Contents
